Bills Mobile Hitch & Tow Bar Installation


What Is A Pintle Hitch And How To Use It?

Pintle mounts and hooks are essential for construction, agriculture, and defense applications. These devices offer an amazing towing capacity and a basic layout for steady heavy-duty towing. Furthermore, the general pintle hitch works with a hook-and-loop design. And the hook is fixed on the vehicle, and the loop is connected to the trailer.

The Pintle hitch is a helping hand to help you with your heavy-duty towing needs. Their towing capacity lies between 10,000 to 60,000 lbs. and vertical load limits of 2,000 to 12,000 lbs. So, let’s read all about Pintle hitches and their use.

What Is A Pintle Hitch?

A pintle hitch is towing hardware, usually in the form of a jawed lock and heavy-duty hook. It is normally fixed to the vehicle’s back. This towing set-up comes in use for heavy-duty towing on rough terrain and roads. Also, you can use it to achieve a large range of motion between the coupler and the hitch.

A pintle hitch is an ideal alternative to the standard tow ball mounts that helps you in many ways. So, if you require a heavy-duty and rugged towing solution with an ideal towing capacity and range of motion, the pintle hitch is useful for your towing needs.

How To Use Pintle Hitches?

Pintle hitches have many uses in a lot of ways and purposes. You can use these hitches to attach semi-trailers towed as doubles or triples. In addition, these pintle hitches are robust and come with air cushions or springs to reduce shock loading. Furthermore, an inspection of these hitches is done just before use.

Other than that, pintle hitches also have their uses in the military for many reasons. Also, they have a high strength-to-measure ratio. And these hitches are accurately locked with a spring-loaded bolt and a safety pin. The safety pin indicates that the hitch is bolted. And also, the latch locking system creates two points of failure for the hitch to open.

The slope of the pintle hitch and loop allows more articulation while traveling over rugged terrain. In addition, you can use these hitches as a linking point for a winch while removing a vehicle. Furthermore, they are popular as ground support equipment at airports and for purposes like construction and warehouse.

Read More:- Tow Bar Types: Uses, Advantages, Disadvantages, And More

Types And Applications Of Pintle Hitches 

The pintle hitches are majorly available in six types. So, let’s understand them separately with their applications.

  • Rigid Pintle Hitches 

The rigid pintle hitches are the most basic and economical of all pintle hitches. It is usually locked on implementing hardware meeting the maker’s specifications. Moreover, you are responsible for checking the vehicle and its capability to determine if it can resist the towing forces. You can attach these hitches to the back of dump trucks, tow tractors, burden carriers, fork trucks, and other rally equipment.

  • Swivel Pintle Hitches

The swivel pintle hitches are usable in all those vehicles where rigid pintle hitches can be used. The only difference is they require more axle rotation about the horizon of their tongue. Furthermore, these hitches are best for off-road uses, as there is no strapping at the pairing connection. 

  • Cushioned Pintle Hitches

The cushioned Pintle hitches are perfect for rough terrain or heavy-duty applications. These are the ideal hitches for every application where the stock is loading in the forward or backward direction.

  • Adjustable Height Pintle Hitches 

The Adjustable height pintle hitches implement synchronously with a receiver tube to provide additional functionality for regulating the coupler height.

  • Receiver Mounted Pintle Hitch

The Receiver mounted pintle hitch is suitable for automobiles that require to have couplers for many trailer types. They have a permanently installed receiver tube to the vehicle that allows the user to switch out or eliminate couplers rapidly.

  • Combination Pintle Hitch / Ball

The Combination pintle hitch and ball allows the operator to tow trailers with socket and loop-type couplers without any modifications to the pintle hitch.

Maintenance Of Pintle Hitch

Maintenance depends majorly on frequent visual inspections. It means that a person should observe and check on every indication of rust, damage, or corrosion. Also, he should ensure that all parts of the hitches move independently without any restrictions. Furthermore, a person should attach the locks and connections for the best torque, and this maintenance should be done on a daily basis.

Many of you think greasing and oiling the moving parts of pintle hitches would be the best maintenance activity, but it accumulates grime, dirt, and sand that can cause multiple issues further. So, you must avoid greasing the pintle hitch and only do it if the coupler manufacturer has told you to do so.

Other than that, you should also examine the pintle hitch occasionally for excessive wear. Furthermore, when this wear exceeds the maker’s recommendation, it should be taken out of service.


When it comes to meeting your towing requirements, you have plenty of options. But if your towing requirement is specifically for construction or military purposes, consider pintle hitch for towing, as they are for heavy-duty towing jobs.

If you require a pintle hitch installation for your commercial towing needs, contact Bills Mobile Hitch And Tow Bar Installation. Apart from the pintle hitch, we have many other tow bars, hitches, and equipment. 

Our installation services include purchasing related products, which means you just have to sit, and your hitch will get installed timely and securely by our professional installers. Contact us at (623) 210-5427 and get your vehicle a pintle hitch. Also, you can ask queries using our contact us page.

Leave a Comment

Your email address will not be published. Required fields are marked *